MACHINERY
SAFETY

NOT ONLY DESIGN

According to Art. 70 of the Consolidated Safety Act the Employer must make available to workers safe machinery complying with the minimum safety requirements - if built before 1996 - or provided with CE marking and free from defects -if built after 1996; The CE marking does not guarantee the absence of mistakes on the Manufacturer’s side, nor does the CE mark allow the Employer/User to be relieved of responsibility in the event of an injury to a worker caused by a "visible defect".

‎Our staff is certified CMSE® - Certified Machinery Safety Expert (TÜV Nord)".

MACHINERY
SAFETY

NOT ONLY DESIGN

According to Art. 70 of the Consolidated Safety Act the Employer must make available to workers safe machinery complying with the minimum safety requirements - if built before 1996 - or provided with CE marking and free from defects -if built after 1996; The CE marking does not guarantee the absence of mistakes on the Manufacturer’s side, nor does the CE mark allow the Employer/User to be relieved of responsibility in the event of an injury to a worker caused by a "visible defect".

‎
Our staff is certified CMSE® - Certified Machinery Safety Expert (TÜV Nord)".

SERVICES

SAFETY FIRST

In addition to our expertise in design and counselling for the production of industrial machinery, we have skills in the field of FEM and CFD analysis, automation, CE marking and qualification of the final product.

01

Inspection of the machinery and its circuit diagrams in compliance with the provisions of the law in force and the UNI-EN-ISO reference technical standards.

02

Support to the Customer regarding the compliance of the machinery with the law in force with the drafting of a technical report and support for the implementation of the interventions required.

03

Support for CE marking of the machinery and issuing of the documentation to be included in the technical file required by the certification procedure in compliance with the Machinery Directive 2006/42 / EC, including:

  • Risk assessment and reliability check of control systems;
  • Calculation of the Performance Level according to EN ISO 13849-1;
  • Manuals and procedures for using the machinery;
  • Instrumental tests according to EN 60204-1;
  • Structural calculations (if necessary).

SERVICES

SAFETY FIRST

In addition to our expertise in design and counselling for the production of industrial machinery, we have skills in the field of FEM and CFD analysis, automation, CE marking and qualification of the final product.

01

Inspection of the machinery and its circuit diagrams in compliance with the provisions of the law in force and the UNI-EN-ISO reference technical standards.

02

Support to the Customer regarding the compliance of the machinery with the law in force with the drafting of a technical report and support for the implementation of the interventions required.

03

Support for CE marking of the machinery and issuing of the documentation to be included in the technical file required by the certification procedure in compliance with the Machinery Directive 2006/42 / EC, including:

  • Risk assessment and reliability check of control systems;
  • Calculation of the Performance Level according to EN ISO 13849-1;
  • Manuals and procedures for using the machinery;
  • Instrumental tests according to EN 60204-1;
  • Structural calculations (if necessary).

CONTACT US

REQUEST INFORMATION

For technical support or more information about our services, fill in the form.